Pair with Glazing : Timely Industries

uses

LODGING

OFFICE

MEDICAL
OFFICE

DORMITORIES

BUILDINGS
OF WORSHIP

ASSISTED
LIVING

MULTI-
FAMILY

SCHOOLS

HOSPITAL
non-surgical

SINGLE
FAMILY

CLASSIC FRAME (S-Series & C-Series)

PAIR WITH GLAZING

CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Related Information

CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Fire Rating

FIRE RATING – 45 MINUTE
ASSEMBLY	DOOR AREA	GLASS AREA*	GENERAL INFORMATION
Max. Width: 9' – 7" Max. Height: 9' – 11"	Max. Width: up to 6' Max. Height: 9' – 0"	Max. Width: Over 6' up to 8' Max. Height: 8' – 0"	Width: up to 2' Max. Height: 8' – 11"	Width: over 2' up to 3' Max. Height: 4' – 6"	All openings are approved for Positive and Neutral pressure unless otherwise noted. All ratings apply to steel stud, wood stud, or masonry construction. All ratings approved for category “A” and “B” doors with category “G” edge sealing. Timely’s fire rated Metal “U” Insert is recommended for masonry installations. If wood sub-frame is used in place of Metal “U” Insert, it will be necessary to use fire rated drywall on both sides of wood to maintain fire rating. Aluminum or PVC casing does not affect fire rating. Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.
Visible light is 1" less in width and height
View minimum screw length here All dimensions shown are inside dimensions – net door opening size. * Multiple Glass Areas can be created with Mullions. The only limitations are Max. Assembly Width and Height. ** For glass widths exceding 24" the maximum glass area is 1296 sq. in. unless approved by local AHJ. Distributors of Timely Frames may be approved to purchase labels and apply them to frames at their own facility. Intertek has set guidelines and a fee schedule for this program. Requirements and prices are available from Timely or Intertek.

FIRE RATING – 45 MINUTE

ASSEMBLY

DOOR AREA

GLASS AREA*

GENERAL INFORMATION

Max. Width:

9' – 7"

Max. Height:

9' – 11"

Max. Width:

up to 6'

Max. Height:

9' – 0"

Max. Width:

Over 6' up to 8'

Max. Height:

8' – 0"

Width:

up to 2'

Max. Height:

8' – 11"

Width:

over 2' up to 3' **

Max. Height:

4' – 6" **

All openings are approved for Positive and Neutral pressure unless otherwise noted.
All ratings apply to steel stud, wood stud, or masonry construction.
All ratings approved for category “A” and “B” doors with category “G” edge sealing.
Timely’s fire rated Metal “U” Insert is recommended for masonry installations. If wood sub-frame is used in place of Metal “U” Insert, it will be necessary to use fire rated drywall on both sides of wood to maintain fire rating.
Aluminum or PVC casing does not affect fire rating. Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.

Visible light is 1" less in width and height

View minimum screw length here

All dimensions shown are inside dimensions – net door opening size.

* Multiple Glass Areas can be created with Mullions. The only limitations are Max. Assembly Width and Height.

** For glass widths exceding 24" the maximum glass area is 1296 sq. in. unless approved by local AHJ.

Distributors of Timely Frames may be approved to purchase labels and apply them to frames at their own facility. Intertek has set guidelines and a fee schedule for this program. Requirements and prices are available from Timely or Intertek.

CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Rough Openings


ROUGH OPENING DIMENSIONS – THREE SIDED DOOR FRAMES
WIDTH Rough opening width is 1 1/4" over nominal door width. This provides for 5/8" clearance between the jamb and the wall. This clearance is necessary for the pocket on the strike and the projection of the hinge screws. Frames can be installed with smaller opening widths but, in some cases, the framing must be relieved to provide the necessary clearance for plumbing the frame and installing the hardware. Opening width maximum is 1 7/8" which allows 5/16" of the frame face against the wall. For wider rough openings, the frame must be positioned with equal clearance on both sides. (Use oval alignment slots to adjust clearance when installing)
WIDTH FOR DOOR AREA (W1): Door width plus astragal (if mounted between doors)
ROUGH OPENING (W1): Door area width plus 1 1/4"
WIDTH FOR GLAZED AREA (W2): Door width plus astragal (if mounted between doors) plus total glass width(s) plus 2" for each mullion
ROUGH OPENING (W2): Nominal Door width(s) + astragal width (if mounted between the doors) + total width of all glazed openings + 2" for each mullion + 1 1/4"
HEIGHT For a pair of doors, the rough opening height is 1" over nominal height or 13/16" over net height for the door area. Since Timely standard frames are actually 3/16" longer than the nominal height (Timely 7'0" frames are actually 7'0 3/16" long). For the glazed area, the rough opening is 1 1/4" over the total glass height plus 2" for each horizontal mullion.
TIMELY STANDARD HEIGHT FOR DOOR AREA (H1): 3/16" over nominal height
ROUGH OPENING (H1): Nominal height plus 1"
Net Height for Door Area – for frames prepared to other manufacturers’ locations
ROUGH OPENING: Nominal height plus 13/16"
NET HEIGHT FOR GLASS AREA (H2): height of glazed openings plus 2" for each mullion
ROUGH OPENING (H2): Total inside height of sidelight plus 1 1/4"
Download Classic – Pair with Glazing \| Rough Opening image

CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Casing Options

Casing Profiles for Timely Steel Door Frames

Please select “Products > Casing Options” from the main menu if you require additional information regarding Timely’s casing options.

Note: Wood casing can easily be applied to Timely frames. This requires a frame without Casing Retainer Clips. Specify frames with nail holes and oval slots (NHOS) only Wood casing is then installed over the frame face using a nail gun or trim head screws. Casing profile must provide back clearance for screw heads used to install frame.

Fire Ratings: Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.

CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Color Options

Galvanizing is available for all painted finishes and is REQUIRED in areas subject to high humidity, corrosive atmosphere or exterior installations.

STOCK COLORS

PRE-MATCHED CUSTOM COLORS

Standard Price

Custom color matching is also available. Submit color chip for matching. Consult factory for pricing.

Timely carries a large raw materials inventory of Stock finishes.

NAVAJO WHITE
(CC104)

WINTER WHITE
(CC105)

BROWNTONE
(SC101)*†

WHITE WHITE
(CC301)

WHITE SMOKE
(CC302)

BONE CHINA
(CC303)

DESIGNER WHITE
(CC304)

WESTERN WHITE
(SC107)*†

CHARCOAL
(CC401)

CAPE COD GRAY
(CC402)

NEUTRAL GRAY
(CC403)

NICKEL
(CC404)

PRIMER EG (SC109)*†

DRIFTWOOD
(CC501)

SANDY BEACH
(CC502)

CAMEO BEIGE
(CC503)

COZY PEACH
(CC504)

Add 52¢ per ft.

AUTUMN BROWN
(SC102)*

BROWN SUGAR
(CC601)

COCOA
(CC602)

DOESKIN
(CC603)

HARVEST MOON
(CC604)

BLACK
(SC103)*†

CORDOVAN
(CC701)

RUBY RED
(CC702)

ROSEDUST
(CC703)

MAUVE MIST
(CC704)

STONE GRAY
(SC106)*

PACIFIC BLUE
(CC801)

TWILIGHT
(CC802)

COUNTRY BLUE
(CC803)

JADE
(CC901)

ALUMATONE
(SC108)*⊗

KENTUCKY GRASS (CC902)

MIAMI WATERS
(CC903)

MALIBU GREEN
(CC904)

BLACK NICKEL

(CC 905)◊

*Available for Adjustable Frames in powder coat

†Available prefinished for Fixed Throat Kerf frames

⊗Close match to clear anodized aluminum

◊Metal Plating with Clear Coat Gloss

ELITE SERIES

Colors shown may vary slightly.

BRIGHT SOLID BRASS (ES201)

STAINLESS STEEL 430 BRIGHT (ES204)

304 #4 BRUSHED STAINLESS STEEL (ES206)

BRIGHT PLATED BRASS (ES202)

CLASSIC FRAME (S-Series) | Frame Profiles

Click to enlarge drawings

S-Series 20 gauge CRS
1 3/8" Door	Available in both door sizes	1 3/4" Door
	Minimum order quantity of 100 frames for Profiles A and G.

CLASSIC FRAME (C-Series) | Frame Profiles

Click to enlarge drawings

C-Series 18 gauge CRS
1 3/8" Door	Available in both door sizes	1 3/4" Door







3 ¾" FACE HEADER — Use with sub frame for CMU Application 3 ¾" FACE NO STOP HEADER — Use with standard frame for Concealed Overhead Closer Installation 3 ¾" FACE INSERT — Use for sub frame at head with standard frame in CMU

GLASS STOP OR DOOR PANEL CAN BE APPLIED TO ONE OR BOTH SIDES OF ANY MULLION OR JAMB.


NOTES: 1. C-Series Sidelights are only avaliable in Profiles C, E, or F. 2. 4" Sidelights are only avaliable in Profiles E or G. 3. Profiles are shown with TA-8 Casing for example only.

CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Elevations

Click to enlarge

CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Details

Click to enlarge drawings

CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing
		DOWNLOAD Classic Pair with Glazing.pdf To save the file, right click on the link, choose to Save Link As and save the file to a location on your computer.

FRAME MATERIALS	DOOR SIZE & WEIGHT	JAMB DEPTH RANGES	RATINGS
Prefinished Steel	Door Thickness: 1 3/8" or 1 3/4" Max. Door Weight: 200 Lbs. each Max. Door Width: 2 x 4' – 0" Max. Door Height: 12' – 0" **	Standard Jamb Depths: S-Series (20 gauge):* 3 1/2", 3 3/4", 4", 4 5/8", 4 7/8", 5" and 5 3/8" C-Series (18 gauge): 3 1/2", 3 3/4", 4", 4 5/8", 4 7/8", 5", 5 3/8", 6 5/8", 6 7/8" and 7 1/4" Custom Jamb Depths: C-Series (18 gauge):** 3 1/2" to 13" in 1/8" increments.	Not Available
MAX ASSEMBLY SIZE
Max. Assembly Width: 12' – 0" * (for Standard Jamb Depths) 10' – 1" * (for Custom Jamb Depths) Max. Assembly Height: 12' – 0" (for Standard Jamb Depths) 10' – 1" (for Custom Jamb Depths) Max. Mullion Length: 10' – 1"
	* Wider assemblies will have splice joints in frame and casing. Height on custom Jamb Depths is limited to 10' – 1" * Mullions are always supplied in 18 gauge. All widths and heights are inside dimensions – net door or glass opening size.

Email Us - Choose Department

Suggestion Box

CLASSIC FRAME (S-Series) | Frame Profiles

CLASSIC FRAME (C-Series) | Frame Profiles

CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing