YOU ARE HERE: Home > Architects > CAD Files > Pocket Door Trim Kit Overview > Pocket Plan Profile

POCKET TRIM – Plan Profiles

  • Plan Profiles are saved as AutoCad 2010 files.
  • Plan Profiles are Dynamic Blocks with the ability to:
    1. Select from 6 different casing profiles, 1 example wood casing or no-casing.
    2. Select a valid wall size.
    3. Select a valid door width.

NOTE: Dimensions shown are part of the dynamic blocks and should not be manually adjusted. Dimensions are “annotative” and can be set in model space to (3″ = 1′ – 0″ default), (6″ = 1′ – 0″) and (1′ – 0″ = 1′ – 0″).

 

    POCKET DOOR TRIM KIT – Frame Profiles

    P SERIES 20 GAGE CRS
    1 3/8″ Door Available in both door sizes 1 3/4″ Door
    CAD Drawing for Pocket Door Trim Kit   CAD Drawing for Pocket Door Trim Kit
    CAD Drawing for Pocket Door Trim Kit CAD Drawing for Pocket Door Trim Kit CAD Drawing for Pocket Door Trim Kit
         

    NOTE: Profiles are shown with TA-8 Casing for example only.

    * The door is always centered in the wall framing, not the center of the wall. This dimension is only equal if the thickness of drywall is equal on both sides of wall.
    For example if 5/8″drywall is used on both sides of the wall. The dimension is NOT equal if 5/8″ is used on the first side of the wall and 5/8″ + 1/2″ is used on the second side.

     

    POCKET DOOR TRIM KIT – Frame Profiles

    P SERIES 20 GAGE CRS

    SINGLE

    Pocket Door Trim Kit Plan Profile

    		   Pocket Door Trim Kit Plan Profile
    Download Button
    Pocket Door Trim Kit Plan Profile
    Download Button

    SINGLE – Inverted Stop

    Pocket Door Trim Kit Plan Profile

    		   Pocket Door Trim Kit Plan Profile
    Download Button
    Pocket Door Trim Kit Plan Profile
    Download Button

    CONVERGING

    Pocket Door Trim Kit Plan Profile

    		 Pocket Door Trim Kit Plan Profile
    Download Button
    Pocket Door Trim Kit Plan Profile
    Download Button
     

    NOTE: Profiles are shown with TA-8 Casing for example only.

    * The door is always centered in the wall framing, not the center of the wall. This dimension is only equal if the thickness of drywall is equal on both sides of wall.
    For example if 5/8″drywall is used on both sides of the wall. The dimension is NOT equal if 5/8″ is used on the first side of the wall and 5/8″ + 1/2″ is used on the second side.